No products in the cart.
VCRA Applicable Item:
You must be over 18 and have a valid defence under the Violent Crime Reduction Act 2006 to purchase this item. Please enter your defence details (eg. UKARA, Site Membership, Re-Enactment Society Membership etc...)in the comments box during checkout.
If you don't have a valid defence, please add our Two Tone Service before checking out.
The definitive version of the current US military firearms by the M4 carbine enhancement program.
Equipped with RAS (Rail Adapter System), the highly expandable "M4A1 MWS" that supports various optional parts is finally available with gas blowback! The dedicated blowback engine contains a cylinder with a diameter of 19mm, which is the largest in the series, and generates an unprecedentedly strong recoil shock. Equipped with a new mechanism to improve durability, such as the Z-system, the ultimate gas blowback that combines the pursuit of shape reproduction and texture realism, and the high accuracy and operation performance of Tokyo Marui Model.
Equipped with a new blowback engine that uses a large piston with a diameter of about 19mm. The bolt also operates in conjunction with the launch, and you can enjoy an unprecedentedly strong recoil shock.
A new Z-system that prevents wear and damage to the bolt catch, a piston absorber and friction relief bolt rollers that reduce the burden on internal parts due to bolt operation, and a barrel that prevents loosening due to recoil and always keeps the barrel centred. The durability against strong recoil shock has been improved, such as the clamp mechanism.
It faithfully reproduces the same functions as the real thing, such as loading the first bullet by operating the charging handle, bolt catch operation after bolt opening and magazine change and enhanced stock that can be adjusted in 6 stages. In addition, field stripping (normal disassembly for maintenance) can be performed in a form close to the real thing.
Handguard Equipped with RAS (Rail Adapter System) with mounting rails on four sides, top, bottom, left and right. Various optional parts compatible with the Picatinny standard (20mm width) such as flashlight and fore grip can be installed. In addition, the heat shield inside the RAS is also reproduced.
Cerakote, which has a strong coating film and excellent abrasion resistance, is used for the upper/lower frame and bolts. You can enjoy the texture just like the real thing.
The top and bottom of the front sight can be adjusted with the included adjustment tool. In addition, the rear sight can be finely adjusted by dial operation up and down and left and right respectively.
If you remove the muzzle compensator, you can install a muzzle option with a 14mm reverse screw specification such as a silencer.
The magazine, which holds 35 bullets and is made of die-cast aluminium, reproduces the weight of a fully loaded magazine.
| full length | 777 mm / 854 mm (at maximum stock extension) |
|---|---|
| gun length | 250mm |
| weight | 2,970 g (with empty magazine installed) |
| bullet | 6mm BB (0.2-0.25g) |
| power source | Dedicated gas (*1) |
| ammunition capacity | 35 + 1 shot (1 shot when loaded into the main body) |
| type name | M4A1 MWS |
| kinds | Assault rifle |
VCRA Applicable Item:
You must be over 18 and have a valid defence under the Violent Crime Reduction Act 2006 to purchase this item. Please enter your defence details (eg. UKARA, Site Membership, Re-Enactment Society Membership etc...)in the comments box during checkout.
If you don't have a valid defence, please add our Two Tone Service before checking out.
